WW/WIRE

Filed 996W5M read

Walmart’s 55% Automation Target Needs Packaging Rules

Walmart’s plan to move 55% of fulfillment-center volume through automation depends on packaging that robotic grippers and vision systems can handle consistently.

By
Amara Osei
Filed
Length
996 words
Read
5 min
Robots can’t fix what packaging breaks
Robots can’t fix what packaging breakswenwenf_foto / pixabay

Key points05

  • In April 2023, Walmart set FY2026 goals to automate 65% of stores and move 55% of fulfillment-center volume through automated facilities.
  • Walmart expected its FY2026 supply-chain vision to improve unit costs by about 20%, or one-fifth.
  • GS1/Sunrise 2027 and ISTA 3L address parts of automation-readiness but do not define a complete robotic-handling interface.
  • A Midwest grocery distribution center stopped a robotic palletizer when one small case misaligned and required manual correction.
  • Proposed performance metrics include case rate, cost per case and return on capital expenditure.

By Amara Osei

Walmart’s April 2023 FY2026 vision targets moving 55% of fulfillment-center volume through automated facilities, while nearly two-thirds (65%) of stores would receive automation services. Walmart said unit costs could improve by about one-fifth (20%). Subsequent investments in automated distribution centers, fulfillment centers and robotics partnerships show the industry moving quickly toward that future.

Packaging now sits on that route as a capital-allocation risk, not a minor procurement detail. AI-enabled robotic automation has advanced across retail and consumer-products supply chains faster than packaging standards have evolved. The resulting gap imperils major investments underway and planned.

The build-out of physical AI across retail and CPG turns packaging from a mundane tactical concern into a strategic driver of capital productivity. A robot that cannot handle a case reliably leaves expensive hardware waiting for human help. The machinery may be accurate; the package still has to behave.

Standardization has a track record. Pallet-size standardization in the 1940s enabled forklifts and conveyors; containerization in the 1960s unlocked intermodal logistics and port automation; UPC barcodes in the 1970s digitized product identification; and EDI in the 1980s enabled a frictionless interface across trading partners.

More recently, EPCglobal standards improved end-to-end supply-chain visibility. Each innovation reached scale only when its interface became standardized. Packaging has not reached the equivalent threshold for robot-intensive operations.

Why are suppliers waiting?

Retailers need packaging that performs reliably in increasingly robot-ready environments. Suppliers hesitate to invest in “automation-ready” packaging without clear, broadly accepted standards, and standards bodies have proposals the market has not widely agreed on. Many participants also sit early in their robotic automation curve and lack urgency.

The waiting game has a familiar logic: no company wants to incur a private cost for a benefit everyone shares. Sean Ryan, Kirit Rosario and Ron Sasine write in their Kearney analysis: “No one wants to move first if the cost is borne individually while the benefit is shared.”

Suppliers also fear redesigning around requirements that may change or absorbing higher costs before a design standard wins acceptance. Each position is rational; collectively, they produce underinvestment and dilute the value of automation.

What happens when a case breaks the flow?

At a large grocery distribution center in the Midwest, a robotic palletizer built a store-ready pallet at full speed until one small case failed to align with the pallet pattern. The robot detected the exception and stopped. A technician had to enter the safety cage, reposition the case manually and restart work. One package, one intervention, one interruption.

That is how packaging variability becomes lost productivity. Slower throughput, more exception handling, manual intervention and underused assets follow. The machinery is not necessarily wrong. The physical input has failed its brief.

Robots perceive packaging through computer vision, then act on predictable dimensions, surfaces and grasp points. They also need:

  • Cases with enough structural and compression strength to withstand forces from robotic grippers, depalletizers, repalletizers and other automated handling equipment;
  • Reliable labels and barcodes that support accurate identification and routing; and
  • Consistent placement and orientation within the equipment’s operating tolerances.

Any variance beyond those tolerances creates an exception. Manual intervention follows, reducing throughput and asset utilization. Ryan, Rosario and Sasine put the commercial verdict plainly: “The conclusion is simple: robots cannot deliver their ROI when the packaging moving through the system is not designed for robotic environments.”

What must an automation-ready standard specify?

Existing standards cover identification, traceability, package performance and transportation hazards, but they do not collectively define the full physical interface required in robot-intensive retail operations. GS1/Sunrise 2027 and ISTA 3L solve parts of the problem. Together, they still do not supply a complete, widely accepted specification for robotic handling.

A practical industry standard would define:

  • Barcode placement and reflectivity;
  • Case-dimension tolerances;
  • Compression strength;
  • Robotic graspability; and
  • Requirements for surfaces, labels and other features needed by automated handling systems.

The purpose is straightforward: reduce exceptions, minimize manual intervention, operate automation assets at full capacity and deliver their intended economic returns. Packaging variability therefore has to fall if automation is meant to improve structural economics across the supply chain. Otherwise, capital gets deployed, but financial returns disappoint. Packaging cannot remain an afterthought.

What does this change for companies funding automation?

Packaging should be judged on total system value, or TSV, rather than only its unit price. The authors call this a “value-back” approach, measuring what reliable packaging creates across handling, throughput loss, exception management and disruption, then linking those gains to labor productivity, capacity, uptime and capital utilization.

For retailers, consumer-products companies, packaging manufacturers and automation providers, an apparently incremental packaging cost can create meaningful value at network level. The authors are not proposing automation-ready packaging that requires more material, rigidity or waste. Their product reinvention labs say engineered packaging can meet automated-system requirements while improving material efficiency and sustainability goals.

The coordination fix requires more than another voluntary proposal. Retailers, consumer-products companies, packaging manufacturers, automation providers and standards-setting bodies need a coalition because they have the most to gain and lose. One top-tier global retailer with sufficient scale and credibility should lead it, frame the failure points and advocate science-based standards. That leader should also pilot the standards at a reasonable scale and demonstrate value through case rate, cost per case and ROI on capital expenditure.

The analysis comes from Sean Ryan, senior partner in Kearney’s retail and consumer practice; Kirit Rosario, vice president in Kearney’s Product Excellence and Renewal Lab; and Ron Sasine, a Kearney consultant and former Walmart senior director responsible for private-brands packaging.

If no leader convenes the group and accepted standards follow, robotic investment will continue outrunning the packages moving through it. More capacity will be installed, but utilization and returns will remain trapped behind avoidable exceptions. Packaging is the robot’s physical interface, and that interface still needs a rulebook.

Source: scmr.com

Share this article:

More from Amara Osei

Amara Osei

Show full bio

Staff writer covering regulation, policy and their impact on Ocean and air freight, container shipping at Waybill Wire.

950 articles

Related05

  1. Walmart commits US$6bn to warehouse automation push

  2. Material Handling Claims Nearly 70% of North American Robot Orders

  3. Walmart Commits $6 Billion to Automate 25 More Regional DCs

  4. TÜV SÜD and Accenture promise 30% faster AMR certification

  5. Logistics Robots Hit 117,500 Units as Sector Takes 47% of Sales

« PrevNext »