WW/SUPPLYCHAI

Filed 693W3M read

AYK wins 165 MWh order for Molslinjen electric ferries

AYK Energy will supply 165 MWh for three Molslinjen electric ferries, each designed for 1,500 passengers, 500 cars and 40-knot Kattegat service from 2028.

By
Amara Osei
Filed
Length
693 words
Read
3 min
Molslinjen Electric Ferries taps AYK Energy for Battery Power
Molslinjen Electric Ferries taps AYK Energy for Battery PowerBlomst / pixabay

Key points05

  • AYK Energy secured a 165 MWh contract for three fully electric Molslinjen catamarans.
  • Each vessel receives a 55 MWh Polaris LFP battery for speeds up to 40 knots and about 30-minute charging.
  • Each ferry is designed for 1,500 passengers and 500 cars on the Jutland-Zealand Kattegat route.
  • The first service begins in Q1 2028; the other two vessels arrive in 2028 and 2029.
  • AYK reduced the first vessel’s battery installation from over 700 tonnes to below 400 tonnes, exceeding 40%.

By Amara Osei

AYK Energy has secured a 165 MWh battery contract that the company calls the largest in ferry-industry history, supplying three fully electric, high-speed catamarans for Danish ferry operator Molslinjen. Incat Tasmania is building the vessels.

Each vessel will carry a 55 MWh installation of AYK’s DNV type-approved Polaris lithium iron phosphate battery. The system supports speeds up to 40 knots and high-capacity charging in approximately 30 minutes. Wärtsilä signed the contract as systems integrator and will supply the integrated electric propulsion systems and waterjets.

Each catamaran is designed for up to 1,500 passengers and 500 cars across Denmark’s Kattegat, between Jutland and Zealand. When all three enter service, their combined maximum design capacity reaches 4,500 passengers and 1,500 cars, and they are expected to become Europe’s largest electric ferries.

AYK’s redesign cut the first vessel’s battery installation from more than 700 tonnes to less than 400 tonnes, a reduction above 40% after Molslinjen began evaluating suppliers nearly two years earlier. New cells, manufacturing methods adapted from the automotive industry and a lighter aluminum structure improved energy density without compromising performance.

AYK founder Chris Kruger said: “We decided to rethink the battery’s design from the ground up to reduce weight and improve performance. With new battery cells, inspiration from manufacturing techniques in the automotive industry and a lighter, stronger aluminium structure, we can store more energy per kilogram and deliver more power.”

The first catamaran is scheduled to arrive in Denmark in late 2027 and begin operations in the first quarter of 2028. The second and third vessels are expected to arrive in 2028 and 2029, respectively, extending the rollout across three delivery years.

What does this change for shippers and ferry operators?

For Molslinjen and its suppliers, the order turns three operating constraints into a concrete package: 165 MWh of storage, Wärtsilä propulsion and high-capacity charging in about 30 minutes. No fares, deal value or operating-cost savings were disclosed.

For shippers and freight forwarders, the change is narrower than the headline suggests. The announcement specifies passenger and car capacity, but no ro-ro freight slots, truck capacity, cargo volumes or booking arrangements. Nothing here supports a near-term forecast of extra freight supply or rates.

A claimed record battery does not make an early ferry. The commercial test is whether three large catamarans can operate at up to 40 knots, support high-capacity charging in about 30 minutes and carry their planned loads.

The technical challenge remains substantial. The Polaris system includes AYK’s proprietary fire-suppression and thermal-management technologies. Kruger said safety remained a primary consideration because passenger vessels face demanding operating conditions and evacuation challenges.

Molslinjen CEO Carsten Jensen said the weight reduction had been instrumental in selecting AYK. “We are pushing the boundaries of technology here, and the combined weight of the vessel and its batteries will be crucial to operating such large vessels at high speed across the Kattegat,” he said.

That focus matches Wärtsilä’s systems role. Dr. Torsten Büssow noted that large electric ferries must balance rapid, high-power charging, sufficient stored energy for longer crossings and the weight limits of aluminum catamaran construction.

The Molslinjen award also expands AYK’s marine battery portfolio, which already includes:

  • A contract for Germany’s new polar research vessel Polarstern.
  • Two 12 MWh Orion+ installations aboard Brittany Ferries’ hybrid-electric vessels Guillaume de Normandie and Saint-Malo.
  • A 6 MWh battery system for Svitzer’s battery-methanol tug.

Together, these projects show marine electrification scaling across research, passenger and tug applications. The commercial constraints are plain: battery capacity, charging infrastructure and system weight increasingly determine whether fully electric operations work on demanding commercial ferry routes.

The first proof point comes with the first catamaran’s late-2027 arrival and early-2028 service. Its ability to operate at up to 40 knots and handle the planned 1,500-passenger, 500-car load will be tested against the roughly 30-minute charging requirement. Performance on the remaining 2028 and 2029 deliveries will determine whether the design scales into the full three-vessel fleet.

Source: maritimeprofessional.com

Share this article:

More from Amara Osei

Amara Osei

Show full bio

Staff writer covering regulation, policy and their impact on Ocean and air freight, container shipping at Waybill Wire.

950 articles

Related05

  1. Höegh Autoliners to fit BYD batteries on Aurora No. 12 car carrier

  2. China Zorrilla enters service on River Plate route

  3. Marmara Ferry Electrification Could Cut Emissions 63%, IMO Study Finds

  4. Hanwha Power secures ABS approval for 1,700-TEU electric containership

  5. PowerCell lands $2.9m order for hydrogen bulk carriers three and four

« PrevNext »